Perhaps you are using your pergola to cover your hot tub, or as an outdoor kitchen, or place to play a little game of cards, and you know that pesky neighbor (we all have one) is watching... This solid wall extends all the way to the top of the pergola and down to the bottom of the posts. The panel is made of 1 x 6 tongue & groove planks, built on a 2x4 frame. The planks matche that of the pergola (cedar , treated pine of vinyl).

Yes, you can select one two or three sections, of you pergola with a true privacy panel. If you want just part of the side of the pergola to have the privacy, we can do that too. But that would take forever to put here, so be sure to discuss with a design consultant all of you privacy matters... (umm...well, as far as the pergola is concerned!)

INSTRUCTIONS: You will need to choose a Privacy wall (or none) for each of the 3 of the 4 sides of the pergola. There are 2 Long sides and 2 short sides for rectangular, and 3 of the sides for a square pergola. You can combine different walls. For example you could have a solid wall on one side, and half wall on the other side, and a lattice wall on a third side. Or if you have another idea, let us know.

VERY Important Note Concerning all Privacy Panels:

Our Deluxe 4 Beam Pergolas are made so that the posts are stationary and cannot be moved during assembly. Your Privacy panels are built to fit and will attach to the posts.

Our 2 Beam Pergolas give you the ability to move the posts a few inches when constructing them. If you order any of the privacy panels, be sure to discuss in detail the size of the panels, as they will be sent pre-assembled, and will fit fine if you assembled the pergola using standard locations for the posts, unless you specify different dimensions. You may want to have the privacy panels in a knocked down version that will give you the ability to cut and assemble them to fit.

Shown in Treated Pine.